Ecotech Technologies

Features

• Power: 180W
• Switching Power Supply (SMPS)
• Voltage: 60V, Current: 8A

Auto Range function

• With high power ratio and wide range output, you can save the purchase of multiple small power supplies.

List and Delay functions

• The list function can preset the power output curve to facilitate the automatic test
• Delayer function, set the delay output of the power supply. It can help you with on-off test or related test

Multifunctional interactive display

• 2.8inch HD LCD provides more interactive content and displays more real-time information.

Remote compensation function

• Provide remote compensation, and the power readback is displayed as the voltage value at the load end.

RS232 communication

• It supports remote control and can be set and viewed on the PC.

UDP6722 programmable DC power supply is a wide range switching power supply. This model has the characteristics of small size, light weight, and powerful functions; it adopts 4.3inch LCD screen, intuitive parameters and quick operation; it can be used in automatic test system, product development and debugging, laboratory, teaching experiment, mobile phone home appliance repair and other fields.

• 80V/20A/400W wide range output
• 4.3-inch TFT-LCD display
• High precision and low ripple
• OVP, OCP, OTP
• Remote compensation function
• List, delay function, simulate a variety of loading conditions
• Voltage, current and power waveform display
• Fan intelligent adjustment
• Abundant interfaces: RS232, RS485, LAN, USB Host, USB Device
• Support SCPI/MODBUS protocol
• Supporting host computer software to realize remote operation and monitoring

The UTL8500+ Series is a cost-effective programmable DC electronic load series with high performance. With a resolution of 0.1mV and 0.1mA,  multiple protection mechanisms significantly improve the reliability of the equipment.  The Series has a variety of testing functions and modes, equipped with RS-232 communication interface, and can be equipped with other  communication interfaces according to design and testing requirements.The Series provides a flexible, fast and effective solution.

• 150V Voltage 30A Current 300W Total Power,  0.1mV/0.01mA Resolution
• 4.3 inch LCD screen display: 
• Four basic working modes: CC/CV/CR/CP,
• Multiple protection functions Various protections such as over voltage, low voltage, over current, over power, over heat, anti-reverse connection, etc.
• UTL8500 series electronic loads provide more test modes for users to choose, including dynamic test, list test, combination test, OCP/OPP test, CR-LED test, battery test, load effect, OVP test , Short circuit, time test and other modes.
• Screenshot function, list call and system upgrade Press the [Screenshot] button to save the current screen image to the USB flash drive,or save the frequently used list test files in Flash or USB flash drive, so that they can be called when needed next time, and the system can be upgraded quickly through the USB flash drive.

UTL8200+ series electronic load is equipped with a 2.8-inch LCD display, which is easy to operate and stylish in appearance. Its test resolution is up to 1mV/1mA. Equipped with rich test functions and modes for you to choose. The equipment is equipped with RS232 communication module, which can flexibly meet various on-site test conditions, and is convenient for seamless connection with automated production lines and automatic test systems. The electronic load operates stably and has a wide range of applications, adapting to various testing requirements.

UTL8500X+ series DC electronic load is a new generation of intelligent large-screen and cost-effective electronic load. Up to 500KHz synchronous sampling, high-performance DSP processing. The fast, efficient and intuitive LIST programmable automatic test mode meets most R&D and testing needs.

New Launch

The UTL8500+ Series is a cost-effective programmable DC electronic load series with high performance. With a resolution of 0.1mV and 0.1mA,  multiple protection mechanisms significantly improve the reliability of the equipment.  The Series has a variety of testing functions and modes, equipped with RS-232 communication interface, and can be equipped with other  communication interfaces according to design and testing requirements.The Series provides a flexible, fast and effective solution.

• 150V Voltage 30A Current 150W Total Power,  0.1mV/0.01mA Resolution
• 4.3 inch LCD screen display: 
• Four basic working modes: CC/CV/CR/CP,
• Multiple protection functions Various protections such as over voltage, low voltage, over current, over power, over heat, anti-reverse connection, etc.
• UTL8500 series electronic loads provide more test modes for users to choose, including dynamic test, list test, combination test, OCP/OPP test, CR-LED test, battery test, load effect, OVP test , Short circuit, time test and other modes.
• Screenshot function, list call and system upgrade Press the [Screenshot] button to save the current screen image to the USB flash drive,or save the frequently used list test files in Flash or USB flash drive, so that they can be called when needed next time, and the system can be upgraded quickly through the USB flash drive.