Ecotech Technologies

The Fluke 1577 Insulation Multimeter combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.

Whether you work on motors, generators, cables, or switch gear, the Fluke 1577 Insulation Multimeter is ideally suited to help you with your tasks and at a cost that is far less than buying the two products.

Fluke Connect + Fluke's 1587 FC Insulation Multimeter helps you identify tough problems, fix, and wirelessly communicate your work quickly and easily - all at a safe distance.

The MIT400/2 Series insulation and continuity testers are designed for electrical and industrial testing. In addition, they have an exceptionally wide range of applications in electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc.Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%.A variable range has been added to allow any intermediate voltage from 10 V to 1000 V in 1 V steps, where application specific test voltages are required that do not appear in the standard ranges.*Continuity testing is now significantly faster, and a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the “ohms” and “kOhms” ranges. Retained are the 200 mA and 20 mA test options

•  Safely and accurately measure PV insulation resistance even while generating solar power
•  Built-in PV dedicated function, display measurements in 4 seconds
•  Five ranges (50/125/250/500/1000V) built in for normal insulation resistance measurement
•  Built-in 1000 VDC voltage measurement for open voltage tests of PV systems that support 1000 V
•  Built-in comparator function
•  Drop proof design withstands drop onto concrete from a height of 1 meter

The MIC-30 is a hand-held, rugged, easy-to-use, 1 kV class insulation test meter.  The MIC-30 has a wide measurement range, selectable test voltages, and excellent safety features.

• Insulation resistance measurement to 100 GΩ
• User selected test voltages: 50, 100, 250, 500, 1000 V in 10 V steps
• Displays continuous indication of insulation resistance or leakage current
• Audio beeps every five-second periods to indicate measurement progress
• Indication of actual test voltage during the measurement
• Three-lead measurement
• Continuity measurement of protective and equipotential conductors according to EN 61557-4
• Low-voltage circuit continuity and resistance measurement:
• Circuit resistance measurement (<1999 Ω)
• Audio alert signal if circuit resistance is below 30 Ω
• Capacitance measurement during measurement
• Measurement of alternating and direct voltages from 0 to 600 V
• Automatic measurement in sockets with the UNI-Schuko adapter with possibility of configuring pairs of measured cable
• Selectable test times (T₁, T₂ , T₃ from 1 to 600 seconds) to measure one or two absorption coefficients
• Meter conforms to EN 61557

Safety First Features.

• Automatic discharge of tested object after the insulation resistance measurement completes to remove high voltage charge remaining due to cable capacitance
• Protection against measuring live objects, measurement will not proceed

Power Supply

• 4 AA disposable or rechargeable batteries
• Continuous indication of state of battery charge

Memory Features

• 990 memory cells to save test results
• Wireless data transmission to computer using the Bluetooth.

Insulation resistance measurement in a compact, light-weight, low-cost design.

• Measurement to 5 TΩ
• Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
• Continuous indication of insulation resistance or leakage current
• Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
• Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
• Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
• Continuous display of test voltage during the measurement
• Protection against measuring live objects
• Two and three-lead measurement method
• Ramp Test Insulation resistance measurement
• Measurement of breakdown voltage with increments up to 1 kV / s
• Measurement of alternating and direct voltages from 0 V to 750 V 
• 990 cells of memory (11880 records) to record results
• Data transfer to PC via USB cable
• Built-in rechargeable battery pack
• Meets the requirements of the EN 61557 standard
• Charge from optional car lighter (12 V) socket accessory

• Insulation resistance measurement:
  • measurement voltage any in the range of 50…1000 V at 10 V and 1000...5000 V at 25 V resolution,
  • continuous indication of measured insulation resistance or leakage current,
  • automatic discharge of measured object capacitive voltage after the end of insulation resistance measurement,
  • acoustic signaling of 5 seconds intervals to facilitate capturing time characteristics,
  • metered T₁ , T₂ and T₃ test times for measuring one or two absorption coefficients from the range of 1…600 s,
  • adjustable measuring time to 99'59'’,
  • polarization index (PI) and dielectric absorption ratio (DAR) measurement,
  • indication of actual test voltage during measurement,
  • 1.2 mA and 3 mA test current,
  • step voltage insulation resistance measurement (SV),
  • Dielectric Discharge calculation (DD),
  • protection against measuring live objects,
  • measurements with test leads up to 20 m.
• Digital filters function for measurements in high noise enviroment (10 s, 30 s , 60 s).
• Measurement of leakage current during insulation resistance testing.
• Measurement of capacitance during the measurement of R_ISO.
• DC and AC voltage measurement in the range of 0…600 V.
• 990 cells of memory (11880 records) with the capability of wireless data transmission to a PC or through a USB cable.
• Power supply from battery packs, low battery warning indicator, built-in fast charger.
• Display backlit.

The instruments meet the requirements of the EN 61557 standard.

Fluke 1503 Insulation Resistance Tester handles all the basic insulation testing needs

The Fluke 1503 is a great choice for basic residential and commercial electrical insulation testing. This rugged, compact tool fits in the palm of your hand. The 1503 is the same form factor as the Fluke 1507 but with a few less features. You can count on it to handle the most common tests at a most affordable price. Additional features, like the remote probe, reduce the time needed to perform repetitive testing.

The Fluke 1623-2 GEO Earth Ground Tester offers data storage and download capabilities via USB port. World class accessories will simplify and speed up testing time.

Fluke 1623-2 GEO Earth Ground Tester summary

• 3- and 4-pole Fall-of-Potential, earth resistance loop testing
• 4-pole Soil Resistivity testing
• Selective earth ground rod testing using 1 clamp
• Stakeless earth ground rod testing using 2 clamps
• IP56 rated for outdoor use
• Rugged carrying case
• USB data storage and transfer

• Insulation resistance measurement:
  - selected test voltage: 50, 100, 250, 500, 1000 V,
  - continuous indication of insulation resistance or leakage current,
  - automatic discharge of capacitance of tested object after the insulation resistance measurement,
  - acoustic signalling of five-second periods to facilitate obtaining time characteristics,
  - indication of actual test voltage during the measurement,
  - protection against measuring live objects,
  - three-lead measurement.
• Continuity measurement of protective and equipotential conductors according to EN 61557 - 4 with the >200 mA current
• Low-voltage circuit continuity and resistance measurement:
  - circuit resistance measurement (<1999 ) with the <15 mA current,
  - quick sound signal if circuit resistance is below 30Ω.
• Capacitance measurement during the R_ISO measurement
• Measurement of alternating and direct voltages in the 0...600 V range.
• Power supply: 4 AA disposable or rechargeable batteries, monitoring of power supply voltage.
• Meter conform to EN 61557.

• Insulation resistance measurement:
  • selectable measurement voltage in the 100…2500 V range with 100 V step,
  • continuous indication of insulation resistance or leakage current,
  • automatic discharge of capacitance of tested object after the insulation resistance measurement,
  • acoustic signalling of five-second periods to facilitate obtaining time characteristics,
  • measured test times T₁, T₂ and T₃ to measure one or two absorption coefficients in 15, 60 and 600 s,
  • indication of actual test voltage during the measurement,
  • protection against measuring live objects,
  • two and three-lead measurement method,
• Continuity measurement of protective and equipotential conductors according to EN 61557-4
• with the >200 mA current.
• Leakage current measurement.
• Measurement of alternating and direct voltages in the 0...750 V range.
• Built-in rechargeable battery pack.
• The instruments meet the requirements of the EN 61557 standard.
• The ability to charge from car lighter (12 V) socket (additional accessories).

Insulation resistance measurement: up to 20 TΩ,

• measurement voltage any in the range of: 50...5000 V (50...1000 V at 10 V and 1...5 kV at 25 V),
• continuous indication of measured insulation resistance or leakage current,
• automatic discharge of measured object capacitance voltage after the end of insulation resistance measurement,
• acoustic signaling of 5 seconds intervals to facilitate capturing time characteristics,
• adjustable measuring time to 99'59'’,
• metered T₁, T₂ and T₃ test times for measuring one or two absorption coefficients from the range of 1…600 s,
• polarization index (PI), absorption coefficients Ab1, Ab2 and dielectric absorption ratio (DAR) measurement,
• indication of actual test voltage during measurement,
• 1.2 mA, 3 mA and 6 mA+/-15% test current,
• insulation resistance measurement using two- or three-wire method,
• measurements with test leads up to 20 m...
• protection against measuring live objects,
• automatic measurement of multiple core cables with the additional AutoISO-5000 adapter
• measurement of capacitance during the measurement of R_ISO.
• measurement of temperature (with additional probe - WASONT1),
• step voltage insulation resistance measurement (SV),
• Dielectric Discharge calculation (DD),
• location of damage (burnout),

Digital filters function for measurements in high noise environment.
Measurement of leakage current during insulation resistance testing.
DC and AC voltage measurement in the range of  0...750 V.
Drawing graphs on the display during measurement.
Innovative  memory  with possibility of description of:  measurement points,  facilities,  names  of  customers.
Operating with mini Bluetooth keyboard (option).
Graphic LCD 5,6'’ backlit.
Keyboard backlit.
Power supply from main power line or battery packs.
Built-in fast charger.
The instruments meet the requirements of the EN 61557 standard.

MIC-15k1 meter is designed to measure insulation resistance of power objects, i.e.:

• single- and multicore cables,
• transformers,
• motors and generators,
• capacitors, switches and other devices installed in power stations.

It is especially recommended for measurements in areas with very high electromagnetic disturbances, e.g. electrical substations with 1200 kV AC and 500 kV DC. Thanks to the 15 kV measuring voltage (in accordance with ANSI / NETA ATS-2009 TABLES 100.1) the meter can be used for measuring objects with a nominal voltage above 34.5 kV.

Features:

• Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
• It allows testing the electrical durability of the tested object - breakdown voltage indication.
• High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
• The function of smooth voltage rise in time (RT - Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
• Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
  • visual method (if power cables are visible along the entire length),
  • reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
• Compatible with external software.

Insulation resistance measurement:up to 40 TΩ

• measurement voltage any in the range of: 50…10000 V (50...1000 V at 10 V and 1...10 kV at 25 V),
• continuous indication of measured insulation resistance or leakage current,
• automatic discharge of measured object capacitance voltage after the end of insulation resistance measurement,
• acoustic signaling of 5 seconds intervals to facilitate capturing time characteristics,
• adjustable measuring time to 99'59'’,
• metered T₁, T₂ and T₃ test times for measuring one or two absorption coefficients from the range of 1…600 s,
• polarization index (PI), absorption coefficients Ab1, Ab2 and dielectric absorption ratio (DAR) measurement,
• indication of actual test voltage during measurement,
• 1.2 mA, 3 mA and 6 mA test current,
• insulation resistance measurement using two- or three-wire method,
• measurements with test leads up to 20 m...
• protection against measuring live objects,
• automatic measurement of multiple core cables with the additional AutoISO-5000 adapter (for MIC-10k1 max. voltage 5 kV)
• measurement of capacitance during the measurement of R_ISO.
• measurement of temperature (with additional probe - WASONT1),
• step voltage insulation resistance measurement (SV),
• Dielectric Discharge calculation (DD),
• location of damage (burnout),

Digital filters function for measurements in high noise environment.
Measurement of leakage current during insulation resistance testing.
DC and AC voltage measurement in the range of  0...750 V.
Drawing graphs on the display during measurement.
Innovative  memory  with possibility of description of:  measurement points,  facilities,  names  of  customers.
Operating with mini Bluetooth keyboard (option).
MIC-10s1 - Stable measurements in noisy environments such as 765 kV substations.
Graphic LCD 5,6'’ backlit.
Keyboard backlit.
Power supply from battery packs.
Built-in fast charger.
The instruments meet the requirements of the EN 61557 standard.

Connect your Fluke test tool with the ir3000 FC connector and get all the benefits of the Fluke Connect® app.

Supported Fluke tools:

• 289 and 287 True-RMS Multimeters
• 789 ProcessMeter™

The Digital LCR Meter is a precision electronic instrument used for accurate measurement of inductance (L), capacitance (C), and resistance (R) of electronic components. It is widely used in electronics laboratories, R&D, production testing, quality control, and maintenance for component evaluation and troubleshooting. The meter provides fast, stable, and repeatable measurements with high accuracy.