Ecotech Technologies

The UT8803E from UNI-T is a fully-featured true-RMS 6000 counts benchtop multimeter that in addition to temperature and frequency is also capable of measuring capacitance and inductance including the Q-factor. This multimeter comes with free PC software with which you can record data and plot it into a graph.

Features:

• Automatic scale, True rms reading
• Diode / transistor
• Measuring thyristor SCR
• Inductance measurement
• USB interface
• Data retention, Max / Min
• Continuity buzzer

The UNI-T UT8803E multimeter comes with the following accessories::

• UT-S03A socket
• Test Lead
• Alligator clip
• USB interface cable
• Power Cable

• 6000 count backlit digital display
• True RMS reading on a.c. mode
• 1000 V d.c. / 750 V a.c. ranges
• 10 A a.c. / d.c. ranges
• Resistance, frequency and capacitance ranges
• CAT IV 600 V safety rating

• True RMS
• Data hold/backlight
• Max/Min/Relative mode
• USB communication
• Input protection
• Diode/continuity test
• NCV (audible/visual alarm)
• LPF ACV
• ACV+DCV
• Transistor hFE
• Peak Hold

Standard accessories Battery, gold plated test leads, USB cable, multi-purpose socket, English manual

UT196 True RMS solar digital multimeter is an ideal tool for solar power system maintenance. This rugged meter is designed for technicians who work in rugged outdoor environments. UT196 can measure up to 1700V DC and 1500V AC voltages, and 3000A AC current with an external current clamp sensor. This solar meter offers IP65 protection and able to withstand 2m drop as well.

• True RMS
• Measure up to 1700V DC and 1500V AC for high voltage applications e.g. solar array, wind
• IP65 protection
• CAT III 1000V, CAT IV 600V
• Analog bar
• Frequency response：45Hz~1kHz
• Low-pass filter function
• Low impedance mode
• Built-in flashlight, bright backlight and visual alarm

The UNI-T UT171C represents the pinnacle of portable measurement technology, combining industrial-grade precision with an advanced OLED display optimized for extreme environments. Engineered specifically for professionals facing the most demanding measurement challenges, this premium multimeter delivers exceptional visibility in low temperatures, comprehensive measurement capabilities, and sophisticated data management in a rugged package designed for industrial reliability.

• High-Visibility OLED Display: Crystal-clear 60,000 count resolution with superior viewing angles
• Low-Temperature Performance: Maintains display clarity in cold environments where LCD displays fail
• True RMS Measurement: Ensures accuracy on non-linear loads and distorted waveforms
• 100kHz Measurement Bandwidth: Comprehensive frequency response for detailed signal analysis
• AC+DC Measurement Mode: Accurately evaluates combined signals for complete system assessment
• Square Wave Output Function: Built-in signal generator for control system testing
• Rechargeable 7.4V Li-ion Battery: Extended operation with convenient charging
• VFC Low-Pass Filtering: Eliminates high-frequency noise for accurate VFD measurements
• Data Logging: Store up to 9,999 measurements with timestamp information
• USB/Bluetooth Connectivity: Flexible data transfer to computers and mobile devices

UT18B MAX True RMS multi-meters have a compact and portable design, fast response, strong anti-interference to EMC interference, and come with standard gold-plated test leads and gold-plated fine-tipped test leads. It also features full-range 1000V input protection, making them the ideal tool for electronic and electrical engineers.

• True RMS measurement
• Compact design
• V.F.D function
• Fast measurement of Continuity
• Fast measurement of Capacitance
• Two test probes (standard & fine-tipped)
• Strong EMC anti-interference
• Full-range input protection

UT181A is a digital multimeter with trend capture, true RMS, low pass filter, nS conductance, dual temperature measurement, and more. With the help of the datalogging feature, users can store up to 20000 sets of measurement data and display them on a trend graph for long term monitoring.

• Trend capture
• Data logging: 20000
• Data comparison
• 3.5-inch 64k color TFT LCD
• Dual temperature measurement
• Low pass filter
• 2200mAh Li-ion battery
• Real time and date
• Peak hold
• Bluetooth/APP w Optional Accessory
• USB interface cable /PC software CD
• IP65

• 5 1/2 reading multimeter with 1 μV high resolution.
• 30 kS/s high-speed sampling frequency, which makes it easy to capture transient signals.
• Input interface-  front only
• Standard with bar chart, histogram, trend chart and data statistics functions.
• Double display measurement function, displaying voltage and frequency synchronously.
• Ture RMS of AC voltage and true RMS of AC current measurements.
• 0.1 μV resolution, simple operation, flexible parameter setting;
• A variety of measurement functions: DC voltage, AC voltage, DC current, AC current, 2-line resistance, 4-line resistance, capacitance, diode, connectivity, frequency, period, temperature, with the current range reaching 10 A;
• 4.3-inch color LCD screen;
• Safety standard: CAT II 300 V;
• Support SCPI remote control command, compatible with the mainstream multimeter command set in the market, standard with upper computer control software;
• Configuration interfaces: USB Device, USB Host, LAN (HDM3055B), GPIB (HDM3055H).

• Real 6 1/2 bit reading resolution
• Up to 30,000 rdgs/s reading
• Graph display function, trend drawing function to paperless record testing data, statistic information and histogram
• Double display measurement function, display 2 kinds of signal parameters at the same time.
• True RMS AC voltage and AC current measure
• 0.1μV resolution, easy to use, parameters can be settled easily
• Support dual display, Chinese and English menu
• Built in help system, convenient access to information
• 13 kinds of measure functions: DC Voltage, AC Voltage, DC current, AC current, 2 line resistance, 4 line resistance, capacitance, diode, connectivity, frequency, period, current range can be 10A
• 4.3 inch 64K LCD
• Safety standards: CAT II 300 V
• Support standard SCPI Remote control command, upper computer software, Compatible with the latest mainstream multimeter command set
• Configuration interface: USB Device, USB Host,

The Fluke 115 technicians digital multimeter offers simple, one-handed operation to meet the needs of a wide variety of field service technicians. It measures true-rms voltage and current with 6000 count resolution, plus resistance, continuity, frequency and capacitance.

The 115 DMM offers the users one-handed operation and a backlit display with large, easy-to-read digits.

• Measures AC and DC voltage to 600V
• Measures AC and DC current to 10A (20 A overload for 30-seconds max)
• Measures resistance, continuity, frequency, and capacitance
• Provides Min/Max/Average with elapsed time to record signal fluctuations
• Include a holster with probe holders for easy storage and one-handed operation
• Large white LED backlight for working in poorly lit areas

UT590 series multifunction testers mainly test RCD, loop/line impedance, earth resistance continuity, insulation resistance and AC/DC voltage. They are applicable to electrical installation, inspection and repair at home or in construction industry.

Features

• 9999-count LCD display with analogue bar
• 250V~1000V DC insulation resistance test
• 200mA earth-resistance continuity test
• Loop impedance/Prospective Fault Current (PFC)/Prospective Short Current (PSC) test
• Lock test
• RCD trip time test and the data storage with one key
• Full/Half wave and count downing (30s) test mode selectable
• 0°/180° phase angle option to detect the fastest trigger time
• Trip current test of RCD trip time X2
• RCD trip trigger current test
• Phase sequence and missing test
• AC/DC voltage auto check and test
• Connection check with status real-time display
• White backlight; auto power off

The UT3510+ series of benchtop Micro Ohm Meter includes the UT3513+ and UT3516+ models. 4.3-inch LCD display. With high precision, high resolution and high-speed measurement characteristics, with the highest accuracy of 0.05%, the minimum resolution of 1 μΩ. UT3513 + and UT3516 + standard RS-232C, RS485, LAN port and HANDLER communication interface, support for SCPI and MODBUS RTU protocols, and can be with the computer, PLC or WINCE device communication, and efficiently complete the remote control and data acquisition functions.

• 4.3-inch TFT LCD
• Accuracy of 0.05 %, with 22,000 reading
• High resolution of 1 μΩ, with 4 1/2-digit display
• UT3513+ measurement range: 1 μΩ-20 kΩ
• Various test combinations: R, LPR, and T
• Low voltage (LRP) test mode for effective protection of the DUT (Device Under Test)
• Temperature correction (TC)
• Temperature conversion (∆t)
• USB flash drive for saving data and screenshots
• Comparator with sorting and beeper function
• Supports data storage and browse
• Maximum test speed: 10 ms/time
• Built-in temperature correction interface

UT620C+ can measure a wide range of resistance values with high precision. It is a highly accurate portable resistance meter capable of measuring resistance levels from micro-ohm to mega-ohm. It is ideal for testing and maintenance of large equipment, such as measuring winding and welding resistance of large motors and stators for hybrid and electric vehicles. Widely used in telecommunications, power distribution systems, new energy vehicles, petrochemicals, industrial plant grounding systems, etc.

1. Micro-ohm level measurement, resistance measurement range: 0.001mΩ～300.0KΩ

2. Resolution up to 1μΩ

3. The accuracy can reach ±0.1%FS

4. The measurement current ≤ 1A

5. 500 groups of data storage

6. Large LCD display

7. Automatic shutdown, longer standby time

8. The lithium battery can be used repeatedly

9. Compact design, easy to carry and operate

• AC and DC voltage
• AC and DC current
• Resistance
• Capacitance
• Diode
• Frequency and duty-cycle

Designed for easy one-handed operation, the compact Fluke 114 True RMS digital multimeter is the perfect troubleshooting tool for go/no go testing. Its AutoVolt capability automatically switches to measure AC or DC voltage, whichever is present. And you can use the LoZ function to identify so-called ghost voltage and prevent false readings.

The Fluke 114 displays True-RMS voltage and current readings with 6000 count resolution, and tests frequency, continuity and resistance. A large white LED backlight aids work in poorly lit areas. And its easy-open battery access door makes battery changes easy.

A great choice for everyday troubleshooting, the Fluke 114 Electrical Multimeter is CAT III 600 V safety rated and is a compact True-RMS meter.

Fluke 114 multimeters are independently tested for safe use in CAT III 600V environments

The Fluke 87V MAX trms multimeter defines a new standard for operating in extreme conditions, with the features and accuracy to troubleshoot most electrical problems

Withstands drops up to 4-meters (13 feet)

Fluke’s most rugged digital multimeter. The 87V MAX is a trms multimeter built with an industrial strength case and a removable holster. The holster doubles as a test probe holder for one-handed operation.

IP67 rated

This Fluke digital multimeter is fully waterproof and dust proof, to work reliably in all the places that you need to work.

Withstands heat and cold

The Fluke 87V MAX TRMS multimeter has an extended operating temperature range of -40 °C (for up to 20 minutes) to +55 °C

The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment - even in loud, high-energy, and high-altitude locations. The 87V is designed so you can work more efficiently.

• Easy-access door for fast battery changes without breaking the calibration seal
• Analog bar graph for fast changing or unstable signals
• Large digit display with bright, two-level backlight for easier reading in low light
• Touch Hold keeps readings on display even after removing probes

The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.

The Fluke 77 IV digital multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements over Fluke's original 70 Series with more measurement functions, conformance to the latest safety standards, and a much larger display that's easier to view.

Now there's an intrinsically safe digital multimeter (DMM) you can use in a wide range of hazardous settings. Whether you work in petroleum, chemical, or pharmaceutical environments, the 28 II Ex gives high-end test and troubleshooting power you need is packed into the most rugged intrinsically safe (IS) DMM Fluke has ever built: drop-proof, waterproof, dust-proof (IP67). The 28 II Ex meets the following certifications: