Ecotech Technologies

Designed for basic electrical tests, the Fluke 101 digital multimeter offers reliable measurements for residential/commercial electricians and heating and air conditioning technicians. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come. When it comes to professional-grade affordable multimeters, the Fluke 101 digital multimeter is your best choice.

The Fluke 303 comes with all the rugged, reliable and accurate features you have come to trust, in a small, ergonomic design. The innovative body design offers a more compact tool to meet your needs. With features of AC current measurements up to 600 A, a large 30 mm jaw opening and CAT IV 300 V/CAT III 600 V safety rating, you get an easy-to-use tool that handles your everyday electrical maintenance needs.

The Fluke 305 come with all the rugged, reliable and accurate features you have come to trust, in a small, ergonomic design. The innovative body design offers a more compact tool to meet your needs. With features of AC current measurements up to 999 A, a large 30 mm jaw opening and CAT IV 300 V/CAT III 600 V safety rating, you get an easy-to-use tool that handles your everyday electrical maintenance needs.

The Fluke 374 True RMS Clamp Meter can read up to 600 V and 600 A in both AC and DC modes. Additionally, the 374 is compatible with the new iFlex flexible current probe (sold separately), which increases the measurement range to 2500 A AC and provides increased display flexibility, and improved wire access.

• Designed to meet the measurement requirements of safety engineers, health, industrial safety offices and quality control in various environments.
• A and C weightings for checking compliance with safety regulations as well as acoustic analysis
• Measuring ranges: A weighting 30 ~130dB C weighting 35~130dB
• Frequency range: 31.5Hz~8KHz
• Display with 0.1dB steps on a 4 digits LCD
• Slow (1 sec) and fast (125ms) response settings to check peak and average noise levels

Confidently take reliable readings with the True RMS Fluke 355 digital clamp meter, the tool of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. The extra rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when taking high-powered measurements.

Fluke 373 True-RMS AC Clamp Meter is a great choice for AC-only current measurement situations. Featuring True RMS AC voltage and current measurements you can measure AC current to 600 A and AC voltage to 600V. The 373 also measures DC voltage to 600 V and resistance to 6000 Ω.

To make it even easier to use, the large, easy-to-read backlit display provides better visibility in dimly lit conditions. And the 373 automatically sets the correct measurement range based on the voltage present when you power up, so you do not need to move the switch while taking a measurement. When you put it all together, you’ll find the Fluke 373 offers everything you need, plus a little more.

Make go or no-go maintenance decisions with confidence. The Fluke 805 FC Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration, bearing health and machine health.

The Fluke 726 is a precise and powerful, yet easy-to-use, field calibrator. It features broad workload coverage, calibration power, and unsurpassed accuracy needed by process professionals. It measures and sources almost all process parameters to calibrate almost anything. Use it to test sensors and valves, and to test and calibrate transmitters. The 726 interprets results without the help of a calculator and stores measurement data for later analysis.

The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4256 is a digital multimeter designed to deliver maximum functionality for use in a wide range of settings.

The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket types. The DT4282 is a high-precision 60,000 count digital multimeter with direct 10A input and all of the functions and features required for advanced testing in laboratories and R&D.

Earthing or grounding of electrical equipment is essential to maintain safety, protecting lives, as well as prevent damage to equipment. The FT6031-50 is a IP67 dustproof and waterproof two-pole or three-pole ground resistance tester with large, easy-to-read display, highly sensitive earthing rods, and innovative cable winder that significantly reduces the amount of time needed to complete earth resistance tests.

The FT6380-50 measures grounding resistance simply by clamping to multiple-grounded ground wires. No auxiliary grounding rod is needed, and there is no need to disconnect the ground wire from the grounding rod. The compact, low-profile sensor can be used to clamp ground wires with ease, and also provide AC current measurement functionality and can measure currents ranging from leakage current on the order of several mA to load currents of up to 60 A.

− 4-pole method (Wenner's 4-pole method):
Measure soil resistivity when surveying a grounding design

− 3-pole method:
Precisely measure ground resistance

− MEC (Measuring Earth with a Clamp) function:
Measure ground resistance without disconnecting ground electrodes

− 3-pole method using 4-terminal measurement:
Measure ground resistance values of several ohms or less

− 2-clamp method:
Measure grounding resistance at multiple grounds

− Low-resistance measurement:
Continuity test after ground resistance measurement

− 4-pole method (Wenner's 4-pole method):
Measure soil resistivity when surveying a grounding design

− 3-pole method:
Precisely measure ground resistance

− MEC (Measuring Earth with a Clamp) function:
Measure ground resistance without disconnecting ground electrodes

− 3-pole method using 4-terminal measurement:
Measure ground resistance values of several ohms or less

− 2-clamp method:
Measure grounding resistance at multiple grounds

− Low-resistance measurement:
Continuity test after ground resistance measurement

Hioki DC resistance meters measure a broad range of resistance values at a high level of precision. The RM3548 is a high-precision, portable resistance meter capable of measuring resistance levels from microohms to megaohms, and is ideal for the testing and maintenance of large equipment, for example, measuring the winding and weld resistances in large motors and stators for hybrid and electric vehicles.

Minimum order quantity: 1 Piece

The FT6380 measures grounding resistance simply by clamping to multiple-grounded ground wires. No auxiliary grounding rod is needed, and there is no need to disconnect the ground wire from the grounding rod. The compact, low-profile sensor can be used to clamp ground wires with ease, and also provide AC current measurement functionality and can measure currents ranging from leakage current on the order of several mA to load currents of up to 60 A.

Earthing or grounding of electrical equipment is essential to maintain safety, protecting lives, as well as prevent damage to equipment. The FT6031-03 is a IP67 dustproof and waterproof two- or three-pole ground resistance tester with large, easy-to-read display, highly sensitive earthing rods, and innovative cable winder that significantly reduces the amount of time needed to complete earth resistance tests. CAT IV 100 V, CAT III 150 V, CAT II 300 V Key Features • IP67 protected – top of the industry • Test all ground types from Class A to Class D with a single meter • Wide 0 to 2000Ω measurement range • Minimize cabling time with innovative earthing rods and cable winder

Hioki DC resistance meters measure a broad range of resistance values at a high level of precision. The RM3548 is a high-precision, portable resistance meter capable of measuring resistance levels from microohms to megaohms, and is ideal for the testing and maintenance of large equipment, for example, measuring the winding and weld resistances in large motors and stators for hybrid and electric vehicles.

Hioki DC resistance meters measure a broad range of resistance values at a high level of precision. The RM3544 is easy-to-use resistance testers suitable for use on either manual or automated production lines for measuring the winding resistance of motors and transformers as well as the contact resistance of power relays, switches, and connectors. Key Features • 0.02 % basic accuracy, 1 μΩ max. resolution, 300 mA max. measurable current • Measure from 0.000 mΩ (testing current 300 mA) to 3.5 MΩ • Probe for guard jack use and increased measurement current yield an instrument that’s more resistant to noise • Optional LED COMPARATOR ATTACHMENT and high-volume judgment tones combine to ensure PASS/FAIL judgments are communicated reliably in the noisy environment of the production floor • EXT I/O interface with NPN/PNP support can accommodate a variety of automated production lines (-01 model)

Robust and easy-to-use - GE's Druck DPI 611 Pressure Calibrator.

Generate pressure in seconds with the robust, easy-to-use Druck DPI 611 pressure calibrator from GE. The ergonomic, hand-held device provides the best-in-class accuracy, with easy-to-use features, including an intuitive menu that recalls favorite tasks and documents data. With a touchscreen interface and a large color display, the rugged calibrator provides twice the performance in a product half the size of its predecessor.

This fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power to provide all the convenience of the Druck DPI 610/615 and yet it’s half the size, twice as accurate and easier to use.

The DPI 611 is the fourth generation in the DPI 600 family, which was first introduced in 1984. The DPI 600 family revolutionized test and calibration by providing all the tools for pressure generation and signal measurement in self- contained portable packages. The DPI 600 soon became the industry workhorse and today it is simply known as the “Druck.”

Building on the technical legacy and more than three decades of experience in pressure measurement and calibration, the DPI 611 provides all the convenience and reliability of a true “Druck,” yet offers twice the performance in a product half the size.

Hioki clamp meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CM4373-50 is a 2000 A True RMS clamp meter that features stronger jaws, IP54 dustproof and waterproof enclosure to enable professionals to work quickly in tough situations including the development, repair, and maintenance of equipment and devices such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 2000 V (*1) is ideal for the clamp maintenance inspections of electrical and solar power equipment.

GE's Druck DPI 880 is an ultra-compact and simple-to-use multifunction calibrator for testing, configuring and calibrating virtually all process parameters. It is 35% smaller than competitive models and it’s interactive display means a more simple, easier-to-understand interface.

Users no longer need to carry additional recording tools using the data logging capability, can obtain high precision data and address any issue in as much time as it takes to press a button, saving valuable operating time.

The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor.

Hioki Memory HiLoggers are high-speed data loggers for recording multiple channels of voltage, temperature, resistance or humidity signals, some models providing complete isolation between channels and strong noise resistance. The LR8450 offers 1 ms sampling across up to 120 channels, and can be paired with 5 different types of plug-in modules. The modules measure strain and distortion, ideal for automotive applications involving the evaluation of vehicle components as well as robotic equipment.

The new leak meters LD 500/510 with integrated camera and leakage calculation are ideal measuring instruments which help to find and document even smallest leakages (0.1 l/min corresponds to approx. 1 € per year) easily even in far distances.LD 510 is the worldwide first leak meter with an additional freely assignable sensor input for all CS sensors. In addition to the leakage measurement and detection also all necessary measurements with regards to dew point, flow, pressure, and temperature ... can becarried out.

Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The BT3554 battery internal resistance tester sets the standard for assessing the deterioration and remaining life of UPS and other lead-acid batteries by giving a complete diagnosis via battery resistance testing. The specially designed L2020 Pin Type Lead further improves testing efficiency with an L-shaped tip that lets you reach deep into the battery racks to completely probe the terminals. Key Features • Measure and save data in as fast as 2 seconds, a 60% improvement from the legacy 3554 • Instantaneously diagnose battery degradation (PASS, WARNING, FAIL) by measuring internal resistance and voltage • Noise reduction technology improves noise resistance • New protector delivers better ergonomic hold and durability in the field.

The Elcometer 456 Coating Thickness Gauge sets new standards; providing reliable and accurate coating thickness measurements; helping you to become more efficient.The Elcometer 456 dry film thickness gauge is available in three different models. Each coating thickness gauge provides the user with increasing functionality - from the entry level Elcometer 456 Model B, to the top of the range Elcometer 456 Model T.
Integral coating thickness gauges are ideal for single handed operation as the wide footprint of the Bigfoot™ internal probe provides greater stability during coating thickness measurement - allowing for consistent, repeatable and accurate dry film thickness results.

The new Elcometer 415 Industrial Paint & Powder Thickness Gauge provides simple, fast and accurate coating thickness measurements on smooth and thin industrial paint and powder coatings. 
The new Elcometer 415 Paint Thickness Gauge automatically switches between ferrous and non-ferrous metals. Designed to measure cured paint and powder coatings up to 1000μm (40mils), the paint thickness gauge is ideal for the industrial paint & powder market.
With a reading rate of 60+ readings per minute, the new paint and powder thickness gauge allows to inspect more industrial materials in less time.
Compatible with ElcoMaster® software and ElcoMaster® Mobile App, individual paint and powder thickness readings can be transferred via USB or Bluetooth®  to PC or a mobile device for analysis and instant report generation.

The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a loop calibrator with the power of a digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a display that's not only twice as large as the Fluke 787B, but also twice as bright with two levels of backlighting. And its built-in, selectable 250 ohm HART® resistor eliminates the need to carry a separate resistor.
The 789 also has a 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can add an optional temperature measurement module and the wireless data logging capabilities of the Fluke Connect™ mobile app to log data wirelessly to your smart phone and review it from a remote location. So now process technicians can do a lot more while carrying a lot less.

The PV200 is a compact & cost effective I-V curve tracer that uses simple push button operation making it an efficient and versatile tester for PV systems. 999 datasets can be stored on the instrument and once downloaded to the SolarCert software comparison to the standard test conditions can be made.

The tester measures ground (earth) continuity, open circuit voltage, short circuit current, maximum power point voltage, current and power (with AC/DC clamp). The instrument will also give you the fill factor of the PV module or system under test.

The PV200 has a separate 1kV insulation resistance test function, eliminating the need for a separate, expensive device. Meanwhile the high contrast display on the device is clearly visible in direct sunlight.

The unit can also wirelessly capture and record real-time irradiance, ambient temperature and PV module temperature from the Solar Survey 200R. Using the Solar Survey 200R your data can be converted to standard test conditions, in SolarCerts, for you to compare to the manufacturer’s published data.

These are just a few of the reasons we believe you’ll want to invest in our PV200. Key Features:

• All-in-one commissioning tests and I-V curve tracing.
• Automatic fill factor calculation.
• Ground (earth) continuity measurement with test lead null.
• PV string open circuit and maximum power point voltage measurements up to 1000V DC.
• PV string short current up to 15ADC.
• PV array insulation test at 250/500/1000V.
• Tests individual PV modules or strings.
• Memory for up to 999 records with USB download to PC.
• Instant NFC data transfer using the PVMobile app.
• High contrast display, visible in bright light.

The Fluke 715 Volt mA Calibrator delivers outstanding performance, durability, and reliability in a compact, lightweight tool. Offered in the rugged Fluke 80 Series DMM package, the calibrator measures loop current as well as voltage output. It sources voltage to 200 mV or 20 V, measures loop current (0-20 mA, 4-20 mA) signals with 0 .01 % accuracy and 1 µA resolution, and measures voltage output process signals from PLCs and transmitters. It can source or simulate 4-20 mA loop current and provides a 24 V loop supply with simultaneous current measurement.
The 715 is also extremely easy to use with a simple push button interface similar to the multifunction Fluke 750 Series Documenting Process Calibrators. It features the rugged construction that Fluke tools are known for and is EMI tolerant and dust and splash resistant. It also features a removable battery door for quick battery changes.

The Hioki 3665 is a handheld LAN cable tester to easily test wire map, measure cable length and identify twisted-pair cables, and is useful for verifying connections after installing connectors on cables. Optional terminators that facilitate easy identification of multiple cables make the LAN cable tester especially convenient for testing cables in working networks in the event of faults caused by open- or short-circuited cable wiring. Key Features • Wire map check : Detect split pairs with wiring check • Cable length : Get NVP-Enhanced measurement accuracy • Direction check : Identify up to 21 cable destinations

Hioki’s non-contact voltage detection and measurement technology places efficiency and safety as priority considerations with the goal of protecting customers that need to conduct on-site electrical work as part of renovations and expansions of manufacturing plants and buildings. Model PD3129-10 is a non-contact phase rotation meter that detects the phase of electrical current flow within insulated wires without using metallic contact voltage clips. The green arrow indicates normal phase, which can be useful for visual reports that document the proper completion of electrical work. CAT IV 600 V, CAT III 1000 V Key Features • Simply clip clamps onto wire insulation • Green LED arrow clearly shows phase direction, perfect for visual reports • CAT III 1000V • Rotating LED indicator shows the phase sequence for a 3-phase power supply at a glance • Intermittent beeps signal positive phase; continuous tone signals reverse phase • Magnetic base allows the instrument to be secured on a distribution panel

Hioki benchtop battery testers support simultaneous high-speed measurement of internal resistance and battery voltage for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications. The 3561 is a wide range 300 mΩ to 3Ω/20V DC battery internal resistance tester for high-speed production line testing of small secondary batteries. Key Features • High-speed testing for production lines of small battery packs for mobile and portable communications devices • Measure internal resistance and battery voltage • For process control such as in high-speed automated assembly lines Note: The comparison threshold values depend on the battery manufacturer, type, and capacity, and these must be established by the user

• Cable tester verifies wiremaps and identifies faults with LEDs
• MicroMapper™ MT-8200-49A, remote, and patch cable
• Remote unit enables 1-person testing of installed cables
• Two tones for tracing hidden cables
• Test twister pair cables for open circuits, shorts, crossed pairs

The LinkRunner AT Network AutoTester offers user-configured AutoTests for a wide range of important tasks. This network tester’s quick cable test and switch identification facilitate fast problem isolation. Test results can be automatically uploaded to the Link-Live Cloud Service to improve collaboration between network engineers and technicians, creating greater job visibility, project control, and fleet management.

The LinkRunner G2 Smart Network Tester simplifies network validation and the configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. The LinkRunner G2 features an intuitive design that runs Android-based apps with smartphone-like features. This next-generation tester will help improve the efficiency and effectiveness of network operations by accelerating network deployment and problem identification.

Minimum order quantity: 1 PIECE

Hioki Memory HiCorders are high-speed waveform monitoring and recording devices that can simultaneously measure multiple quick-changing phenomena due to complete isolation between channels and from each channel to the ground. The MR8880 is a data acquisition (DAQ) recorder built in with 4 analog channels that can accept direct input of 600V, enabling measurements of 3-phase systems. Key Features • CAT III 600V isolation performance; directly measure a 480V power line • 4 completely isolated channels let you simultaneously record data on a 3-phase power line plus have one extra channel • Tough against harsh environments; -10°C to 50°C operating temperature range • Built to withstand mechanical shocks and vibrations (ships standard with side protectors) • Make settings easily with PRESETS function

Optimize the placement of solar systems and verify window efficiency. The SOLAR-100 measures solar output that is used to calculate overall energy, efficiency and placement of solar systems.