Ecotech Technologies

UT8805E is a 200000 (5 1/2 Digit) count benchtop digital multimeter with high precision, multi-function and full-automatic measurements for various requirements. It is Cabable of various Mathematical functions:Maximum, minimum, average, standard deviation, relative measurement, bar chart, histogram, trend chart, dB/ dBm, Pass/Fail, etc.

• True 5½-digit reading resolution
• Up to 5k rdgs/s sampling rate
• Multiple mathematical operations
• True-RMS,AC voltage range:750V,AC current range:10A
• Built-in thermocouple cold junction compensation
• Arbitrary sensor measurement
• 1Gb flash memory storage which can support up to 10k data recall
• With 4.3 inches TFT LCD. Pass/Fail
• Support USB, GPIB, RS-232C and LAN interface; support USB-TMC, IEEE 488.2 standard, VXI11 and SCPI language
• Standard power cord,USB interface cable, Test leads, Double female straight-through serial cabl, Product Warranty Card, backup fuse

UTL8200+series electronic load is equipped with a 2.8-inch LCD display, which is convenient and simple to operate, stylish and elegant in appearance, stable in operation.Supports dual-channel completely independent testing, has a wide power measurement range, and has a test resolution as high as 1mV/1mA.

Function:

• 2.8-inch 24-bit true color LCD display
• UTL8211+: Single channel 150V /40A, 400W
• Maximum power 400W,maximum current 40A,maximum voltage 150V
• 4.8MHz Current-Voltage Synchronous ADC Sampling
• Single channel 400W 
• 1mV/1mA measurement resolution
• Four basic operation modes CC, CV, CR, and CP
• Up to 5kHz dynamic current test
• Programmable current rise and fall rate
• Support short circuit(short)simulation function
• Support multi-mode battery discharge mode
• List mode, support automatic test, support quick uninstall
• Over-voltage, low voltage, over current, over power, overheat protection
• Power polarity reverse alarm
• Infinite servo, intelligent fan system
• Power off memory function
• Standard RS232 interface
• Standard SCPI protocol
• Equipped with host computer software to realize remote operation and monitoring

UT533 insulation multimeter is a fully functional digital multimeter and digital insulation tester with RMS, widely used in industrial, laboratory, home and other Applications. It features AC and DC voltage, AC and DC current, resistance, capacitance, frequency and temperature, and also has 1000V testing voltage insulation resistance measurement function.

• AC/DC voltage measurement
• AC/DC current measurement
• Insulation resistance measurement
• Resistance & Capacity test
• Frequency & Temperature test
• 1000V output voltage
• Double insulation design

UTi730E is an advanced thermal camera with Wi-Fi capability. Its large 3.5” IPS display screen can clearly display 320×240 thermal resolution 2MP visual camera, or a blended image of both. UTi730E’s 5200mAh detachable battery pack is also convenient for easy and quick battery change, allowing continuously work for long periods of time.

• 3.5”IPS display screen (640×480 Pixels)
• IR resolution: 320×240
• Temperature measurement range: -40℃to 400℃  / -40℉ to 752 ℉
• Auto alarm for high/low temperature
• Auto tracking for hot spot/cold spot
• On screen analyzer :5 Points/1 Line/3 Rectangles/3 Circles
• Image capture
• Digital camera resolution: 2MP
• Digital zoom: 2x, 4x
• Image modes: Thermal,Visual image,Fusion,PIP
• Color palettes: 7(White hot, Black hot, Red hot, Ironbow, HC Rainbow, Rainbow, Lava)
• Isotherm(Auto/Ratio/Below/Above/Section/Manual)
• LED flashlight
• Wi-Fi connection through Mobile App
• QR Code – photo management
• PC software: analysis and real-time image projection
• 5200mAh replaceable battery pack (Type-C rechargeable)
• 1/4”tripod mounting hole
• IP54
• 2m drop proof

The Fluke 377 FC true-rms clamp meter uses FieldSense™ technology to make testing faster and safer, all without contacting a live conductor. You get accurate voltage and current measurements through the clamp jaw. Simply clip the black test lead to any electrical ground, put the clamp jaw around the conductor and see reliable, accurate voltage and current values on the display.